New Radios both mounted and installed

Well I finally got the AM FM fully mounted 🙂

Here are the prior posts about this

Post 1

Post 2

I had to create a wooden spacer to make it fit. It was deeper than the space I tried to install it in.

Here it is under the VHF. I still have to stain the wooden spacer I built to match the wood of the bulkhead.

I also mounted and installed the Uniden 525BK VHF that i got over christmass. The hole I had cut out to mount the Standard Horizon VHF I had previously installed had to be cut out larger. With the DSC capabilities of the newer radio I had to wire in the NMEA183 signal from the Garmin GPS and I also pre-wired up the hailer cable.. last but not least I setup the MMSI number I got on the Boat US website.

Here are a few pictures.

Radio mounted over the AM/FM radio

The WHAM4 Wireless handset to the radio Mounted under the chart table and inverter.

It lights up at night 🙂